Guide How To Reset Canon PIXMA TS707
Every Epson Printer and Printer with other brands such as Canon and HP that are used continuously, in the long run, will definitely encounter the problem called Error Blink on the Power indicator, Ink Indicator, Indicator Paper either alternately or simultaneously. This is due to and caused by the Pad Counter which has reached the maximum limit of printer storage and usage. So it takes an action reset again so that the Pad Counter status becomes 0 again.
One of the characteristics of the printer that it is time to reset the Waste Ink Pad Counter is the printer when it is turned on directly Blink the Ink and Power Indicator Simultaneously or Alternately Blink the Ink and Power Indicator.
Instructions on how to reset Canon TS707, download the software to reset the Canon PIXMA TS707 printer with error 5B00, 1700 and flashing yellow 7 times (the power light and the paper light flash alternately). Waste ink spills need to be reset before the machine can be used.
In 2020, Canon will launch the Canon TS707 inkjet printer line, the products in the Canon TS700 series model series: TS708, TS704, TS707, Canon TS705, TS702, these are the printer lines with compact and convenient design. High-performance sharp print quality suitable for small and medium offices.
Error 5B00, 5b01, 5b02, 1700 (report on a computer), flash 7 times (on printer ) usually occurs after a period of use, this error is common on color inkjet printers of Canon, the main reason is that the IC ROM (memory chip) it will count the print limit, the printer cannot clear reset or delete but need intervention with the Service Tool software, now there is a full version of ST V.5510. keygen is the full version that can reset most Canon color printing lines.
To reset the Canon PIXMA TS707 printer we prepare the following steps:
Download service tool software here: Canon ST707 Resetter Free Download
Enter service mode of printer TS707
To enter Service mode Canon TS707 you follow the steps below:
- Power off the printer but do not unplug it.
- Hold the Power button ( POWER )
- Continue to hold the power button and press the STOP button 5 times after pressing the Stop button 5 times, release the POWER button, wait for a little while you will see the power light is still without blinking.
- Setting the Canon Pixma TS707 Printer to Service Mode
- Run the Service Tool Application
- Click EEPROM
- Set Main in Absorber on Clear Ink Counter Option
- Click Set on the Clear Ink Counter Option
- Set JPN on the Set Destination Option
- Click Set on the Set Destination option
Clip: Instruction to enter Service Mode Canon TS700 series: TS708, TS704, TS707, Canon TS705, TS702, PIXMA TS706
Thus the tutorial guide on how to easily reset the Canon Pixma TS707 printer with a blink 5B00 error. Good luck and good luck